-
General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Its low viscosity gives the system excellent wet -out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. For a faster system use hardener CLH 6333. CLR 1625 / CLH 6330
-
General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. CLR 1625 / CLH 6333
-
Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580
-
Product is machine dispense friendly. A filled, high temperature operating, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive fillers and convenient mix ratio makes it suitable for processing in automatic dispense equipment. As part of an insulating system, it will meet class H, electrical temperature. This product meets UL94-V1 in house flammability testing. CLR 1820 / CLH 6440
-
UL 94-V1 Epoxy system for casting and potting electrical and electronic components, as part of an electrical insulating system it will meet Class H electrical temperature classification. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. CLR 1821 / CLH 6441
-
1:1 Mix Ratio, Fast Gel, Medium viscosity, Flameout, 180°C operating, Ballast potting. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio make it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. CLR 1826 / CLH 6445
-
Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. A heat cure, low stress, extremely tough, epoxy casting compound. Product was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1831 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1836 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1837 / CLH 5185
-
Heat Cure, UV resistant, outdoor, low-stress, large mass casting epoxy system for instrument and power transformers. Extremely tough, epoxy compound. this system was specifically developed for use on outdoor instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 2161 / CLH 5100
-
General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372
-
Structural Adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. A single component structural adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. CLS 9420
-
High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600
-
UL 94-V0 certified fast setting, potting / casting PU for transformers, coils, and electronic components. A two component, low viscosity, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. Product has excellent thermal shock resistance. XP 61862 / CLI 4161
-
High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015
-
The product cures to a shore hardness of 50 A, low viscosity, soft system. A two component, very flexible epoxy system. XRD 1347 / XHD 1348
-
4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090